CH Flat Ejector Pin - Amati Endüstriyel

CH Flat Ejector Pin

DIN 1530 FORM F ve FA

S. B. Lama İtici Pim-1

FORM F PLASTIC INJECTION

Material

1,2210	TOOL STEEL
1,2250	TOOL STEEL

Hardness

1,2210	60 HRC – 2
1,2250	60 HRC – 2

FORM FA METAL INJECTION

Material

1,2344	HOT WORK STEEL
Z.B*40	CR Mo V 51

Hardness

Body Min. 1400 N/mm2 42 HRC +3

Nitrasyon Min 950 HV 0,3 mm2 67 HRC

Technical Table

A	B	d2	d4	K	L1+2
0,9 – 1,0 – 1,2 – 1,5	3,5	Ǿ 8	Ǿ 4	3	80 – 100 – 125 – 160
0,9 – 1,0 – 1,2 – 1,5	4,5	Ǿ 10	Ǿ 5	3	80 – 100 – 125 – 160
0,9 – 1,0 – 1,2 – 1,5	5,5	Ǿ 12	Ǿ 6	5	80 – 100 – 125 – 160
1,0 – 1,2 – 1,5	7,5	Ǿ 14	Ǿ 8	5	80 – 100 – 125 – 160 – 200
1,2 – 1,5 – 2,0	9,5	Ǿ 16	Ǿ 10	5	80 – 100 – 125 – 160 – 200
1,5 – 2,0	11,5	Ǿ 20	Ǿ 12	7	80 – 100 – 125 – 160 – 200 – 250 – 315 – 400
2,0 – 2,5	13,5	Ǿ 22	Ǿ 14	7	80 – 100 – 125 – 160 – 200 – 250 – 315 – 400
2,0 – 2,5	15,5	Ǿ 22	Ǿ 16	7	80 – 100 – 125 – 160 – 200 – 250 – 315 – 400
2,0 – 2,5	16,5	Ǿ 24	Ǿ 18	7	80 – 100 – 125 – 160 – 200 – 250 – 315 – 400
2,0 – 2,5	18,5	Ǿ 26	Ǿ 20	8	80 – 100 – 125 – 160 – 200 – 250 – 315 – 400
L2 Size is available upon request.

S. B. Lama İtici Pim-2

Note: There is no standard stock. Special production is also possible in desired diameters and dimensions other than those listed.